Where to mount your stickers
Save the wave stickers (as shown on the right) use a long life, high quality & UV resistant vinyl. Current versions are around 70mm high and 65mm wide, printed on a nice reflective material. For a limited time, all stickers are personally/individually numbered.
We suggest you mount your sticker in a nice prominent place so people can see it when they drive toward you.
Of course you can mount them wherever you like, but most people mount one in the very centre at the top, or on the right hand side (if you drive on the left). If you have a second sticker, put that on the rear window in a similar place.
Be sure to keep them out of your driving vision, the Mini has a large section of window at the top that you can’t see though, so this is perfect.
You want people to see them from as far away as possible so they can be ready to wave!
How to apply your stickers
- Take your new Save the Wave sticker and ensure it is flat and smooth.
- Give the window area a good wipe with window cleaner and/or a clean rag so it is dry & dust free. The sticker goes on the outside of the car!
- Carefully peel the sticker off the backing paper.
- While avoiding touching the adhesive side, apply the sticker, nice and level – then, smooth it down firmly with your finger or a soft rag.
- Done…
- Wave!